CS-2000 Floor Stain

A multi-component nano-polymer gradient composite integrating inorganic interpenetrating polymer networks with MOD, sol-gel, and sp³ structures. Vertical bonding and permeation curing ensure a robust coating-substrate interface, while the hybrid nanostructure delivers exceptional hardness and wear resistance.

ConcreteDiamond grinding for concrete floorsWhetstoneEpoxy floor refinishingTile Refinishing

Get a Quote

Application Effect Showcase

Technical Specifications

Authoritative Test Report

Testing Agency: Quality Supervision and Inspection Center for Aging of Chemical Synthetic Materials (Guangzhou Aging Institute)
Report No. TL26040110 | Testing Period: 2026/3/4 to 2026/4/1

CS-3200 Test Report - Test Items and Results

AppearanceMulti-color liquid options

Solid Content≥40%

Density1.15±0.05 g/cm³

pH value8-9

Theoretical Usage0.08-0.1 kg/m² (depending on base compaction)

Drying timeSurface dry: 2-4 hours, fully cured: 24-48 hours

Pencil Hardness≥3H

Durability≤0.02g (GB/T 1768-2006)

Adhesion0 Level (GB/T 9286-1998)

Impact Resistance50kg·cm, no cracks

Flexural Strength≥15 MPa

Compressive Strength≥80 MPa

Temperature resistance-40℃~+120℃

UV resistanceQUV Test 1000 hours ΔE ≤ 2

Expiration date18 months (keep in a sealed, cool, and dry place)

Construction Process

Thoroughly clean and prepare the base to ensure it is solid and level.

Rough-grind with 50-100 grit resin discs, then fine-grind with 200-400 grit. Thoroughly remove slurry and loose layers; vacuum until clean.

Apply dedicated primer to enhance penetration.

Apply primer evenly. Usage: 0.1-0.15 kg/m². Allow to dry for 2-3 hours until touch-dry.

Apply the colorant in two coats for even coverage.

Apply a thin first coat at 0.05 kg/m² and allow to dry for 4-6 hours. Apply the second coat normally at 0.05-0.08 kg/m² using a cross-hatch pattern.

Apply CS-3200 protectant to enhance durability.

After the colorant has fully cured (24–48 hours), apply the protective coating 1–2 times using a roller at a rate of 0.15–0.2 kg/m². Allow it to cure for 24 hours.

Important Notes

Construction Safety and Quality Control

Construction temperature: 10-35°C; humidity ≤80%. Prevent condensation.
Newly poured concrete must be cured for at least 28 days before construction begins.
Old floors must be completely stripped of wax and coatings.
Minor color variations may occur between production batches. We recommend purchasing an adequate quantity in one order.
Clean construction tools immediately after use.
Ensure adequate ventilation at the construction site.
Avoid direct sunlight on the construction surface
Avoid contact if pregnant or allergic.

Maintenance Guide

Avoid washing for 7 days after application

Clean with a soft broom or vacuum for daily use

Periodically clean with a neutral detergent

Avoid scratching the floor with sharp objects.

Suggest adding protective mats in vehicle driving areas.

Reapply protective coating every 1-2 years to extend service life.

Need professional construction services?

We provide professional flooring installation teams to ensure optimal results.

Contact our expert team